Case-chargers
The case is designed for storage and transport of the receivers and transmitters included in the Tour Guide set of the WT-300 series, in the amount of 24 pieces. It is characterised by a solid, very similar to the AC-300 case construction. It is also reinforced with aluminium structural angles protected with corners made of high-impact plastic, provides protection against mechanical damage of the equipment. The inside of the case is divided into sections with the charging connector for placing the devices, which prevents them from movement during transport. In the right, inner part of the case there is a place for the power adapter with the cable. The charging process is signalled with a LED diode. The case is closed with two solid clasps which are additionally protected with locks.
Specifications:
- Application 26 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: – Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power suppl AC 100V – 240V/0,3A – DC 12V/5A
- Dimensions 44,50 x 27 x 16 cm
- Net weight 5,16 kg
- Gross weight kg ( devices , batteries , l eashes )
The transport and charging case belongs to the group of devices enhancing the comfort of use of the Tour Guide Systems, WT-300 series. It is used to store, transport, and also charge, if the transceivers are equipped with batteries. As one unit, it is intended for 36 pieces of transceivers. A smart charging system allows to control the proper fitting of the devices in connectors, as well as the process of charging and batteries’ charge. The case charging can by conducted by using the so-called alternative current grid or the stabilised one, or 12V low voltage direct current, e.g. of a car power supply (!). The construction made of high quality components, reinforced with an aluminium profile, provides a long life and optimum conditions for the transported and stored devices. In order to facilitate the transport, it is equipped with transport wheels and two manual handles with a spring to eliminate vibrations during transport. The case is closed with two solid clasps which are additionally protected with locks. Its top cover, in case of lifting, is assisted by an actuator, which additionally protects it against accidental closing during the use of its inside equipment.
- Application 36 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: – Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- Dimensions 44,50 x 27 x 16 cm
- Net weight 5,16 kg
- Gross weight kg ( devices , batteries , l eashes )
The HDC-712 Case-charger is designed to store, transport and charge receivers and transmitters included in a 12-piece Tour Guide set of the WT-300 / WT-300N series. A robust structure. The interior of the case is separated into slots with connectors to embed the devices in order to charge them. The devices embedded in the slots are additionally protected against movement during transport. The battery charging process is monitored by an intelligent process with LED signalling for each of the devices. The case is closed with two solid latches, additionally protected with locks.
- Application 12 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- Dimensions 48,20 x 39,93 x 20,90 cm
- Net weight 16 kg
- Gross weight 20 kg ( devices , batteries , l eashes )
The HDC-525 Case-charger is designed to store, transport and charge receivers and transmitters included in a 25-piece Tour Guide set of the WT-500 / WT-600 series. A solid structure, the spitting image of the AC-500 case is also reinforced with aluminium brackets secured with plastic, high-impact corner guards ensures protection of the devices against mechanical damage. The inside of the case is separated into slots with connectors to embed the devices in order to charge them. The devices embedded in the slots are additionally protected against movement during transport. The right side, inner part of the case has space for a power supply together with a cable. The battery charging process is monitored by an intelligent process with LED signalling for each of the devices. The case is closed with two solid latches, additionally protected with locks.
- Application 25 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- Dimensions 44,50 x 27 x 16 cm
- Net weight 5,16 kg
- Gross weight 6,76 kg ( devices , batteries , l eashes )
The HDC-525 Case-charger is designed to store, transport and charge receivers and transmitters included in a 25-piece Tour Guide set of the WT-500 / WT-600 series. A solid structure, the spitting image of the AC-500 case is also reinforced with aluminium brackets secured with plastic, high-impact corner guards ensures protection of the devices against mechanical damage. The inside of the case is separated into slots with connectors to embed the devices in order to charge them. The devices embedded in the slots are additionally protected against movement during transport. The right side, inner part of the case has space for a power supply together with a cable. The battery charging process is monitored by an intelligent process with LED signalling for each of the devices. The case is closed with two solid latches, additionally protected with locks.
- Application 50 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- “Rack” mounting height 1 drawer ./ 20 cm
- Dimensions 44,50 x 27 x 16 cm
- Drawer weight + accessories 4,55 kg
- Power supply weight 2,65 kg
- Fan weight 1,30 kg
- Guide weight 2 pcs. 1,70 kg
- Gross weight 15 kg ( devices , batteries , l eashes )
The HDC-550 “rack” type panel charger is designed to store and transport receivers and transmitters included in a 50-piece Tour Guide set of the WT-500 / WT-600 / DigiBee series. The drawer has a solid, metal design. The inside is separated into slots with connectors to embed the devices in order to charge them. The devices embedded in the slots are additionally protected against movement during transport. The battery charging process is monitored by an intelligent process with LED signalling for each of the devices.
- Application 50 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling: Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- Dimensions 48,20 x 39,90 x 20,90 cm
- Net weight 16 kg
- Gross weight 20 kg ( devices , batteries , l eashes )
Charging drawer HDC-50 is designed to store and charge up to 50 Tour Guide WT-300 / WT-300N series devices in 1 drawer. A robust, metal structure of the drawer is separated into slots with connectors to embed the devices in order to charge them. The devices embedded in the slots are additionally protected against movement during transport. The charger is available in the form of a set to be assembled in appropriate “rack” cases, used, e.g., in stage technology. A basic set is a drawer for 50 devices, 2 metal ball bearing slides, a set of fans, a power supply with cables in an elastic chain guide and supply cables. The entire package requires installation in the a/m „rack” type cases, which, depending on the number of drawers, can be made on demand by our company. The recommended number of drawers in 1 rack is 4 pcs for 200 devices.
- Application 50 pcs (receiver/transmitters)
- Charging current 370-430 mA
- Charging time 8-9 h / Ni-MH 2500 mAh
- Intelligent PWM charging feature with charging signalling : Red LED = charging, Green LED = charging completed, Flashing LED = charging error ( damaged battery, incorrectly embedded in the device)
- Power supply AC 100V – 240V/0,3A – DC 12V/5A
- “Rack” mounting height 1 drawer ./ 20 cm
- Dimensions 40 (48,50 with guides ) x 32 x 7,50 cm
- Drawer weight + accessories 4,55 kg
- Power supply weight 2,65 kg
- Fan weight 1,30 kg
- Guide weight 2 pcs. 1,70 kg
- Gross weight 15 kg ( devices , batteries , l eashes )
HDC-01AA MixTech
The transport and charging case belongs to the group of devices enhancing the comfort of use of the Tour Guide Systems, WAT-01AA series. It is used to store, transport, and also charge if the transceivers are equipped with batteries. As one unit, it is intended for 35 pieces of the transceivers. A smart charging system, located in every transceiver, allows to control the process of charging and batteries’ charge, as well as to charge the device individually using the other 5V power with a mini USB port. The case-charger charging is done directly by using the so-called alternative current grid. The construction made of high quality components, reinforced with an aluminium profile, provides a long life and optimum conditions for the transported and stored devices. The case is equipped with a manual handle for the horizontal transport, and it is closed with two solid clasps which are additionally protected with locks.
- Power requirements AC 100V – 240V
- Charging time 3 – 4 h. / Ni-CD 700 mA, 5 – 6 h. / Ni-MH 1300 mA, 10 – 15 h. / Ni-MH 2000 mA
- Voltage and charging current DC 5,8/300mA
- LED ON, LED OFF
- Batteries while charging, Batteries charged
- Number of charging connectors 35 (receiver/transmitters)
- Load control Intelligent battery charging control system over time in each device
- Weight 5,5 kg
- Dimensions 55,5,20 x 37,50 x 13 cm